Doge v2 RDA by Congrevape - Competition Rebuildable Atomizer
You have to hand it to Congrevape for producing such a high-quality and well-designed RDA at such an affordable price. The Doge v2 Rebuildable Dripping Atomizer is a substantially improved version of the outrageously popular Doge RDA. This improvement is quite a feat, as the original version was itself a masterfully engineered device that deserved the enormous amount of praise it received.
The Doge RDA begins with a foundation made of high-grade 302 stainless steel. 302 stainless steel is a non-magnetic, austenitic metal that is exceptionally solid and durable. This specific version of heat-resistant stainless steel was chosen over 304 stainless steel due to its higher carbon content. It was also selected over 301 steel, as 304 stainless steel, as its higher nickel content makes it more resistant to corrosion.
Congrevape designed the Doge v2’s deck with a tri-post setup. The negative stainless steel posts are milled directly into the RDA’s deep 5mm juice well, making it extremely solid. The keyed 3mm positive post is constructed with C110 copper, which is an exceedingly conductive metal. As a 99.9% pure copper alloy, C100 copper has an electrical conductivity rating of 100% IACS. Also referred to as Electrolytic Tough Pitch (ETP) copper, C100 copper is widely used for its anti-corrosion properties. However, for those who prefer stainless steel posts, Congrevape brilliantly included a separate stainless steel positive post that can be substituted for the copper one. Each of the posts is furnished with over-sized copper screws coupled with 3mm holes, perfect for large gauge wires. Moreover, the Doge v2 RDA can accommodate single, dual, and quad-coil builds, making it a very versatile device.
The Doge v2 Rebuildable Dripping Atomizer’s outer barrel is equipped with dual adjustable airflow slots that are 11mm x 2.5mm in size. Congrevape intelligently designed the top cap with a smaller individual air hole, perfect for single-coil builds. The Doge v2 RDA’s top cap is highlighted by Congrevape’s patented 1mm air injection hole, which is located above the outer barrel. This helps to substantially cool the vapor while simultaneously increasing expansion. The air injection hole also serves to provide massive vapor clouds with less power, as well as helping to produce superior flavor production. The Doge v2’s top cap is also armed with Ketron Polyetheretherketone (Peek) insulation, protecting it from thermal degradation. Peek insulation is known for its resistance to high temperatures, which is especially important for sub-ohm vaping.
In every way, the Doge v2 Rebuildable Dripping Atomizer by Congrevape is an absolute home run. From its solid stainless steel construction, to its spectacular performance, to its gorgeous aesthetics, this remarkable device is perfect for anyone looking for a high-quality RDA for an exceptionally affordable price.
Purchase Wicks and Wires
Purchase Rebuildable Tools
Purchase an Ohms Meter
PLEASE MAKE SURE TO READ THE IMPORTANT SAFETY INFORMATION IN THE "HELPFUL TIPS" TAB BELOW.
Doge v2 RDA Specification:
Case Material: 302-Grade Stainless Steel
Base Material: 302-Grade Stainless Steel
Negative Post Material: 302-Grade Stainless Steel
Positive Post: C100 Copper / Replaceable With 302 Stainless Steel
Build Capacity: Single-Coil, Dual-Coil, Quad-Coil
Atomizer Type: Rebuildable
Manufactured By: Congrevape
Doge v2 RDA Includes:
1 x Doge Rebuildable Dripping Atomizer
1 x Stainless Steel Replacement Positive Post
1 x Extra Set of O-Rings
1 x Spare Parts Kit
Doge v2 RDA Features:
Three Post Design
C100 Copper positive Post
302 Stainless Steel Construction
Milled Negative Posts
Deep 5mm Juice Well
Large Copper Screws
Dual Adjustable Airflow Slots
Top Cap Cooling Air Hole
Patented Injection Hole For Cooler Hits
Massive Vapor Clouds
Can Accommodate Single, Dual, and Quad-Coil Builds
Top Cap Constructed With Peek Insulation
Incredible Flavor Production