Wismec Indestructible RDA - Rebuildable Atomizer by Jay Bo Designs

  • Ex Tax: $34.99
  • Product Code: M00002578
  • Availability: In Stock

Wismec Indestructible RDA - Rebuildable Atomizer by Jay Bo DesignsFrom the makers of immensely popular products, such as the Reuleaux line of Wismec b..

Wismec Indestructible RDA - Rebuildable Atomizer by Jay Bo Designs

From the makers of immensely popular products, such as the Reuleaux line of Wismec box MODs, comes one of the most exciting and impressive rebuildable dripping atomizers on the market today—the Wismec Indestructible RDA. Designed by Jay Bo, this beauty has been fabricated to accommodate large and complex builds with great ease. Precision machined to perfection and designed in California, it is no wonder why the Wismec Indestructible RDA has been met with such enthusiastic reviews.

Wismec used the highest quality materials in constructing the Indestructible RDA. The body is made with 303-grade stainless steel. An austenitic metal, 303 steel is blended with 18% chromium and 8% nickel. This combination provides for a solid and durable material that is highly resistant to rust and corrosion. The stainless steel pin is plated in 24k gold for superior electrical conductivity, making the Wismec Indestructible RDA an exceptionally responsive atomizer.

Wismec paid careful attention to the mouthpiece of the Indestructible RDA. The 10mm wide-bore drip tip is designed with a slope, adding to the smooth and steady airflow. The base of the mouthpiece contains a series of 16 air holes, each measuring 2.5mm in diameter. The second layer of the base is solid, thereby channeling the airflow to the mouthpiece. This is a truly phenomenal design.

The Wismec Indestructible RDA’s top cap is equipped with a stainless steel airflow washer. This component is furnished with a total of 8 air holes, each measuring at 2.5mm in diameter. The holes are broken into two groups of four on either side of it. By rotating the airflow washer, you can customize the amount of air that is drawn into the device when taking a hit. You can increase the number of holes for airier hits or decrease them for tighter ones.

Jay Bo designed a magnificent barrel for the Wismec Indestructible RDA. The device’s barrel was created to accommodate both single-coil and dual-coil builds. On one side of the Indestructible RDA’s barrel are three 2.7mm holes that run parallel to each other, which is intended for dual-coil builds. On the opposite side is a series of three perpendicular holes, which is designed for single-coil builds. The center hole measures at 2.7mm x 4mm, while the holes on either side are 2.7mm in diameter.

One of the most sensational features of the Wismec Indestructible RDA is its uniquely configured deck. The negative posts are milled to the deck with an extremely large shelf terminal below it, allowing for very large and complex builds with great ease. The negative post’s screws are also oversized, adding to the Indestructible RDA’s ease of use. The cyclopes-style positive posts are completely open, thereby permitting thick wire and hefty builds. The positive posts are insulated with PEEK insulator, which is the very best material for heat insulation.

From its incredible deck and its deep juice well, to the impressive airflow and sensational drip tip, the Wismec Indestructible RDA is unquestionably one of the very best rebuildable dripping atomizer available today. Affordably priced, this impressive RDA is a must have for all builders and drippers.


Purchase Wicks and Wires


Purchase Rebuildable Tools

Purchase an Ohms Meter



Wismec Indestructible RDA Specifications:

Manufactured by: Wismec

Designed by: Jay Bo

Threading: 510

Body Material: 303 Stainless Steel

Height: 1.42 Inches (36mm)

Diameter: 0.87 Inches (22mm)

Available Colors: Black, Stainless


Wismec Indestructible RDA Includes:

1 x Wismec Indestructible Rebuildable Dripping Atomizer

2 x Replacement Phillips Screws (Negative Posts)

2 x Replacement Hexagon Screws (Positive Post)

3 x Replacement O-Rings

Wismec Indestructible RDA Features:

Innovative Airflow Control Washer

PEEK Insulation

Perfect for Single-Coil and Dual-Coil Builds.

Unique Sloped Wide-Bore Drip Tip

Milled Negative Posts

Oversized Post Screws

Made with 303-Grade Stainless Steel

24k Gold-Plated Center Pin

Large Shelf Terminal

Deep Juice Well

Cyclopes-Style Positive Post

Remarkable Airflow

Extremely Rich, Intense, and Tasty Flavor

Capable of Producing Immense Vapor Clouds

Innovative Top-Cap Design

Write a review

Note: HTML is not translated!
    Bad           Good